logis grips silence plus application

LOGIS GRIPS® SILENCE PLUS

Silencer plate with hard grain interspersion for drive-over ramps and safe footing

 

Your business advantage: Loading and unloading of goods also in the early morning hours or at late hours

 

Noise reduction: reduces noise by approx. 85 percent, which corresponds to 25 dB

 

No more slipping: Improvement of the anti-slip properties of the surface to R12 (tested and certified by the Employer’s Liability Insurance Association according to DIN 51130)

 

Fast installation: For self-installation or by our service partners on site and usually ready for use again after 1 hour.

LOGIS GRIPS® SILENCE PLUS – Innovative silencer plate solves noise problems in loading quickly and sustainably – TÜV approved!

 

The silencer for your loading and transfer ramps. This is exactly what the revolutionary LOGIS GRIPS® SILENCE PLUS technology is all about. Once screwed on, noise is reduced by approx. 85 percent, i.e. 25 dB.

 

Loading and unloading noise are annoying noise generators – and are also perceived as deliberately disturbing by the general public. Studies have shown that constant exposure to noise makes people ill.

 

The Dutch “PIEK Ordinance”, for example, only allows trucks with over 65 decibels (dB) to enter the city center between 7 a.m. and 7 p.m., and trucks with 60-65 dB are only allowed to load and unload until 11 p.m.. But since this cannot be reconciled with the just-in-time just-in-sequence development of 24-hour delivery, transport and logistics companies must do more to combat this noise pollution.

Especially for retail chains, loading and unloading of goods is also necessary in the early morning hours or at late hours. For just-in-time & just-in-sequence delivery, the LOGIS GRIPS® SILENCE PLUS sound insulation panel is the solution. This has already been used for several years in various markets and has solved the noise problems quickly, successfully and sustainably.

 

100% Made in Germany: LOGIS GRIPS® SILENCE PLUS sound insulation panels are manufactured in Germany and are certified by the Employer’s Liability Insurance Association, DEKRA, 3G, TÜV Rheinland and TÜV Nord.

Grips® Silence complete set

Available at:

LOGIS GRIPS® SILENCE PLUS complete set

Full-Service-Offer incl. Assembling on site

 

Complete-Set

 

  • Our Full-Service-Offer incl. On-site installation by our certified service staff.
  • Anti-slip and silencer plate with rough granulate surface for noise insulation measures on drive-over ramps as refurbishment or initial equipment.
  • The ordered goods including all materials for assembly are delivered free of charge.
  • LOGIS GRIPS® SILENCE PLUS Silencer Plate is individually cut to size on site and mounted on the loading platform.
  • The total time of assembly is approx. 1 hour per drive-over ramp, the loading ramp is then immediately ready for use again.
  • Maintenance and spare parts are included on request.

LOGIS GRIPS® SILENCE PLUS Silencer Plate

1000 x 2000 mm or 1000 x 2500 mm

 

LOGIS GRIPS® SILENCE PLUS

 

  • Anti-slip and silencer plate plate with rough granulate surface for noise insulation measures on drive-over ramps as refurbishment or initial equipment.
  • Very high noise reduction up to 25 dBA, equivalent to 85% noise reduction.
  • LOGIS GRIPS® SILENCE PLUS with rough granulate surface: combines high coefficient of friction with high R-class even in wet conditions. DEKRA-tested coefficient of friction in wet conditions > 0.60μD, slip class R12.
  • High elasticity and good adhesion to rough surfaces.
  • Easy and fast workability without curing time; approx. 1 hr. per drive-over ramp.
  • High load capacity and resistance to aging.
  • Unrestricted processing temperature.
  • Dekra-tested quality according to VDI 2700, sheet 14. Slip resistance tested according to DIN 51130.

LOGIS GRIPS® SILENCE PLUS Assembly Kit

All for self-assembly

 

  • Contains everything you need to assemble LOGIS GRIPS® SILENCE PLUS yourself.
  • Consisting of fastening materials for plates and aluminum wedges, a countersink, drills and thread-forming screws for mounting a muffler on the desired loading ramp.

LOGIS GRIPS® SILENCE PLUS Aluminum Wedge

Approach protection for the plates

 

  • The aluminum wedge is mounted on the silencer plate edges and creates a barrier-free transition for loading personnel, forklifts, lift trucks, etc. to the ramp floor.
  • The muffler plates are protected from damage by the wedge.
  • Aluminum solid profile: height 5mm / width 50mm / length 2500mm

LOGIS GRIPS® SILENCE PLUS – Silencer for crossover-ramps.

Easily and quickly mounted!

logis grips siloence plus anwendung

Putting on plates …

Drilling, sinking, screwing …

Attach approach wedge …

logis grips silence plus application

Done!

Advantages

Load at any time without noise with the silencer for your loading docks. This is exactly what the revolutionary LOGIS GRIPS® SILENCE PLUS technology is. Once screwed on, the noise is reduced by approx. 85 percent, ie 25 dB. For your business, this means earlier loading times in the morning and longer ones in the evening, and without annoying local residents with excessive noise pollution. In addition, the anti-slip function of the surface increases to R12 and thus meets the highest safety requirements.

 

For self-installation or by our service partners on site in less than one hour per ramp! LOGIS GRIPS® SILENCE PLUS is available for every new drive-over ramp ex works and as a retrofit kit for your existing ramps.

 

LOGIS GRIPS® SILENCE PLUS are manufactured fully automatically in quality-assured processes in Germany. Your advantage is that the comprehensive certificates from TÜV and the Employer’s Liability Insurance Association regarding noise reduction and slip resistance can be adopted without further testing on site.

  • No more stress with the authorities: Expert opinion for noise reduction by 85 percent (25dB).
  • More flexible business: load earlier in the morning and longer in the evening without the fear of disturbing residents with noise.
  • Carefree working: Your employees no longer need to wear hearing protection against noise.
  • Even in heavy rain: no more slipping.
  • No adverse effect on the statics of the ramp.
  • Quality is a top priority: highly resistant to weather, salt and chemicals.
  • Good and fast: quick screw-on on site (approx.1 h).
  • No exceptions: LOGIS GRIPS® SILENCE PLUS available for all new docks.
  • Easy to reorder: available as a retrofit kit for existing docks at any time.
  • Individual and competent advice.

Frequently asked questions

How are the plates attached? Can each drive-over ramp be retrofitted?

LOGIS GRIPS® SILENCE PLUS panels are available in the dimensions 1,000 x 2,000 mm and 1,000 x 2,500 mm. The panels are customised on site using commercially available tools. This means that any drive-over ramp can be retrofitted. The plates are fixed to the plateau by means of screws. To avoid tripping hazards, approach wedges are placed at the butt edges, which are also fixed by means of screws.

Is the system certified?

Yes, LOGIS GRIPS® SILENCE PLUS is certified. All properties have been tested for various characteristics by various testing institutes. Of course we can send you the certificates. Please simply write us a message for this.

How wear-resistant is a LOGIS GRIPS® SILENCE PLUS Silencer Plate?

It depends on the frequency of use. When used properly, the LOGIS GRIPS® SILENCE PLUS plate is very resistant to wear. In addition, the plates are resistant to salts, oils, diesel and various chemicals. We will be happy to provide you with a resistance list as well as tests for wear.

How long does the installation take? Can I install the panels myself?

Of course, the in-house facility manager can install the anti-drumming panels. assemble by yourself. Installation instructions are included in the LOGIS GRIPS® SILENCE PLUS Mounting kit .. However, we recommend installation by one of our regional installation partners to be carried out. The installation time is usually 1 hour per drive-over ramp, which is then immediately ready for use.

Accordion Title

Empty section. Edit page to add content here.

Feel free to ask!

 

We are always happy to advise you. Simply call us or write us an email. We will get back to you as soon as possible.

 

Are you a retailer and interested in including our products in your catalogue? No problem! Contact us!

 

+49 (0)8636 695 900
info@logis.ag

Error: Contact form not found.