Retrofittable durable anti-slip coating with hard grain scattering for the safety of people and goods


High Quality: No plasticizers!


No more slip and sliding: Improvement of the anti-slip function, through additional hard grain scattering, for loads = 0.6µD, even in wet conditions. Thus meets the highest requirements for safe transport.


On the safe side: High non-slip safety for people and goods.


You need, we offer: Pre-assembled in various sizes and shapes available, individual cuts possible.

Unbeatable – the patented durable LOGIS GRIPS® ANTISLIPMAT PLUS technology offers the highest functional values of a PU surface with hard grain dispersion in combination with a self-adhesive base on the market in terms of sliding friction values and load capacity. This makes the durable LOGIS GRIPS® ANTISLIPMAT PLUS miles superior to conventional solutions.


If you want to apply the best anti-slip properties yourself quickly and remove them again easily after use, then our durable LOGIS GRIPS® ANTISLIPMAT PLUS is the best choice!

Available in all shapes: Angular, round, roll or individual, applicable for example on transport boxes, pallets, box bodies or loading wood. Also available as E-Pad conductive and without self-adhesive base!


100% Made in Germany: the durable LOGIS GRIPS® ANTISLIPMAT PLUS components are manufactured fully automatically in quality-assured processes in Germany and certified by

Product details and application







  • Without plasticizer, therefore durable and long lasting
  • Easy and fast workability
  • Precise cutting with standard cutting tools possible
  • High coefficient of friction combined with corresponding slip resistance due to surface structure
  • Elastic and noise absorbing
  • Tested friction coefficient according to VDI 2700, sheet 14 > >0.60μD
  • Tested coefficient of friction according to VDI 2700, sheet 14 > in wet conditions 0.60μD
  • Slip resistance tested according to DIN 51130 R12
  • Chemical resistance: against de-icing salts, car oils, diesel, etc.



Application fields:


  • Load securing floor as initial equipment
  • Refurbishment of existing cargo floors of vans
  • Vans, delivery/distribution vehicles, open small trailers and many more
  • Ramps


Self-adhesive industrial step and transport safety pads as anti-slip and wear protection for a wide range of applications, such as loading platforms and drive-on ramps.


The new generation of self-adhesive anti-slip coatings!


The durable LOGIS GRIPS® ANTISLIPMAT PLUS components are manufactured fully automatically in quality assured processes in Germany. Your advantage is that the comprehensive certificates of TÜV, DEKRA, 3G and the professional association regarding slip resistance can be adopted without further tests on site.

  • Without plasticizer, therefore durable and long lasting
  • Improvement of the anti-slip function >0,6µD
  • Highest coefficients of sliding friction and load capacity with low weight
  • Pre-assembled available in various sizes (length and width)
  • For a wide variety of applications: Loading platforms, ramps
  • Self-adhesive for easiest application
  • Quality has top priority: Strongly resistant
  • Chemical resistent


What do you have to consider when gluing the products? What about existing air bubbles?

Application is done according to the installation instructions. You can take these from our download area. It must be ensured that the substrate is clean, dry, as even as possible and free of grease.


LOGIS GRIPS® ANTISLIPMAT PLUS can be positioned quite well by rolling it out and cutting to size.


If air bubbles appear, peel off the topping and press on again at a shallow angle.

Is the system certified?

Yes, LOGIS GRIPS® ANTISLIPMAT PLUS is certified. All properties have been tested for various characteristics by various testing institutes. Of course we can send you the certificates. Please simply write us a message for this.

How long does the material last in terms of abrasion?

Apart from mechanical damage requiring repair, LOGIS GRIPS® ANTISLIPMAT PLUS is very durable.

Does the material stain?

No. LOGIS GRIPS® ANTISLIPMAT PLUS does not stain any surface.

Is a residue-free removal of the material possible or how are residues removed?

The removal of LOGIS GRIPS® ANTISLIPMAT PLUS is possible by peeling off the entire coating. If adhesive residues remain, these can be removed very easily with weak organic solvents such as isopropanol or ethyl ester.

In which sizes is LOGIS GRIPS® ANTISLIPMAT PLUS available?

LOGIS GRIPS® ANTISLIPMAT PLUS is available in the maximum size of 1,250 x 5,000 mm.

Is it possible to obtain LOGIS GRIPS® ANTISLIPMAT PLUS in other dimensions?

Yes. LOGIS GRIPS® ANTISLIPMAT PLUS is also available in your desired dimensions. You can also cut LOGIS GRIPS® ANTISLIPMAT PLUS yourself using a cutter knife.

Is LOGIS GRIPS® ANTISLIPMAT PLUS suitable for any surface? Many anti-slip coverings must not be used on floors like vinyl

Yes, LOGIS GRIPS® ANTISLIPMAT PLUS can be applied to almost any surface. We do not use plasticizers that destroy plastics.

Is the flooring suitable for electrical appliances? What happens if the flooring gets hot?

LOGIS GRIPS® ANTISLIPMAT PLUS can be used for any equipment without any concerns. The material withstands temperatures from -40° to +80° degrees without any problems.

Is it possible to clean LOGIS GRIPS® ANTISLIPMAT PLUS?

Yes, the surfaces can be easily cleaned by sweeping and/or with a high-pressure cleaner. This is also recommended at regular intervals to maintain safety.

What advantages do I have over other anti-slip mats or anti-slip pads?

  • Without plasticizer, therefore durable and long lasting
  • Available in self-adhesive or flexible version
  • No slipping! On every surface!
  • Resistant to salts and oil
  • High slip resistance/slip-proof
  • Does not stain
  • Available in various sizes (length and width)
  • Hardly any wear and elastic
  • Very good adhesion on almost any surface

Feel free to ask.


We are always happy to advise you. Just give us a call or write to us. We will contact you immediately.


You are a dealer and are interested in adding our products to your catalog? No problem! Please get in contact with us.


+49 (0)8636 695 900