anwendung industrie beschichtungen


Self-adhesive wear protection easy to apply


  • PU-based high-tech film without solvents and plasticizers


  • Significantly extends the life of surfaces such as steel


  • Easy to apply on site


  • High resilience


  • Easily replaceable for long-lasting protection


  • Recyclable

Extending the service life of heavily stressed surfaces such as steel is becoming increasingly important due to low availability and greatly increased prices. Extend service life easily and quickly with LOGIS’ patented wear protection film (powered by DOW):



PU-based coatings have been a proven solution to protect heavily used surfaces for many years.


Until now, however, the coating had to be applied manually, ideally before installation or with great effort and long downtimes when retrofitting on site. In addition, the quality of manual application is highly heterogeneous and replacement after wear is very costly.


LOGIS has managed to separate the production and application of high performance coatings. This leads to both a more homogeneous and higher quality production of the coating, as well as easier application directly on site. To achieve this, LOGIS has cooperated with DOW as one of the market leaders for PU systems and with Lohmann as a specialist for films.


Solutions that have proven themselves over many years can thus be easily and quickly retrofitted in top quality.

Available in all shapes: Square, round, roll or custom cut. Available as E-Pad conductive or also without self-adhesive base!


100% Made in Germany: LOGIS GRIPS® PROTECT are manufactured fully automatically in quality-assured processes in Germany and certified by:

logis grips protect soft anwendung

Product details and application







  • Without plasticizer
  • Easy and fast workability
  • High wear protection
  • High elasticity
  • Noise absorbing
  • Precise cutting with standard cutting tools possible
  • Slip resistance due to surface structure
  • Chemical resistance



Application fields:


  • Wear protection in the production area
  • Wear protection for industrial equipment and mechanics

File safely

Noise absorbing

Impact protection

logis grips gecko



Self-adhesive industrial wear protection, also as anti-slip protection for various applications.


The new generation of wear protection!


The LOGIS GRIPS® PROTECT components are manufactured fully automatically in quality assured processes in Germany. Their advantage is that the comprehensive certificates from TÜV and the professional association regarding slip resistance can be adopted without further tests on site.

  • PU-based high-tech film without solvents and plasticizers
  • Significantly extends the life of surfaces such as steel
  • Easy to apply on site
  • High resilience
  • Easily replaceable for long-lasting protection
  • Recyclable
  • Available prefabricated in various sizes and shapes, individual cuts also possible
  • For a wide variety of applications: e.g. transport boxes, pallets, box bodies, load boards
  • Quality has top priority: Highly resistant also to weathering, salt and chemicals


Frequently asked questions

What do you have to consider when gluing the products? What about existing air bubbles?

Application is done according to the installation instructions. You can take these from our download area. It must be ensured that the substrate is clean, dry, as even as possible and free of grease.


LOGIS GRIPS® PROTECT can be positioned quite easily by rolling it out and cut to fit precisely.


If air bubbles appear, peel off the topping and press on again at a shallow angle.

Is the system certified?

Yes, LOGIS GRIPS® PROTECT are certified. All properties have been tested for various characteristics by various testing institutes. Of course we can send you the certificates. Please simply write us a message for this.

How long does the material last in terms of abrasion?

Apart from mechanical damage requiring repair, LOGIS GRIPS® PROTECT are very durable.

Does the material stain?

No. LOGIS GRIPS® PROTECT do not rub off on any surface.

Is a residue-free removal of the material possible or how are residues removed?

LOGIS GRIPS® PROTECT can be removed by peeling off the entire covering. If adhesive residues remain, these can be removed very easily with weak organic solvents such as isopropanol or ethyl ester.

In which sizes is LOGIS GRIPS® PROTECT available?

LOGIS GRIPS® PROTECT is available in max. size of 1,250 x 5,000 mm.

Is LOGIS GRIPS® PROTECT also available in other sizes?

Yes. LOGIS GRIPS® PROTECT can also be made up to your desired dimensions. However, you can also cut LOGIS GRIPS® PROTECT yourself at will using a cutter knife.

How does the surface behave with regard to food?

The surface is food safe, but not food safe. It can be used for the transport of food. However, there is no approval for direct contact with food.

Is LOGIS GRIPS® PROTECT suitable for any surface? Many anti-slip pads may not be used on floors such as vinyl

Yes, LOGIS GRIPS® PROTECT can be applied to any surface. We do not use plasticizers that destroy plastics.

Are LOGIS GRIPS® PROTECT suitable for electrical appliances? What happens when LOGIS GRIPS® PROTECT get hot?

LOGIS GRIPS® PROTECT can be used for any equipment without any concerns. The material withstands temperatures from -40° to +80° degrees without any problems.

Can LOGIS GRIPS® PROTECT be cleaned?

Yes, the surfaces can be easily cleaned by sweeping and/or with a high-pressure cleaner. This is also recommended at regular intervals to maintain safety.

Feel free to ask!


We are always happy to advise you. Simply call us or write us an email. We will get back to you as soon as possible.


Are you a retailer and interested in including our products in your catalogue? No problem! Contact us!


+49 (0)8636 695 900