logis grips silence docking

LOGIS GRIPS® SILENCE LIGHT PLUS

Silencer mini dock aluminum composite plate with hard grain dispersion

Noise reduction: reduces noise by approx. 85%, equivalent to 25 dB

Your business advantage: loading times 24/7hr without any disturbances to residents

Immediate installation: For self-installation or by our service partners on site and usually ready for use again after 1 hour

 

LOGIS GRIPS® SILENCE LIGHT PLUS – The latest generation of mini docks with anti-drumming coating and bedding!

The silencer for your mini docks. That’s exactly what the revolutionary LOGIS GRIPS® SILENCE LIGHT PLUS technology is. Once screwed on, the noise is reduced by approx. 85%, i.e. 25 dB.

Loading and unloading noise is a disturbing source of noise – and is also perceived as deliberately disturbing by the public. Studies have shown that constant noise pollution makes people ill.

The Dutch “PIEK regulation”, for example, only allows trucks with over 65 decibels (dB) to enter the city center between 7 a.m. and 7 p.m., and trucks with 60-65 dB are only allowed to load and unload until 11 p.m. However, since this is not compatible with the just-in-time just-in-sequence development of 24-hour delivery, transport and logistics companies must increasingly do something about this noise pollution.

With LOGIS GRIPS® SILENCE LIGHT PLUS we have the only solution with 85% noise reduction for mini docks – which in this case gives us a clear competitive advantage.

100% Made in Germany: LOGIS GRIPS® SILENCE LIGHT PLUS are manufactured fully automatically in quality-assured processes in Germany and certified by DEKRA and …

Grips® Silence komplettset

Available at:

LOGIS GRIPS® SILENCE LIGHT PLUS Set

Full service offer incl. assembly on site

Complete set

 

  • Our full service offer including on-site installation by our certified service staff.
  • Anti-slip and anti-drumming mini dock with rough granular surface for noise insulation measures as renovation or in the original equipment.
  • The ordered goods including all materials for installation are delivered free of charge.
  • The total duration of the installation is approx. 1 hour per ramp, the mini dock is then immediately ready for use again.
  • Maintenance and spare parts are included on request.

 

 

logis grips silence light plus_1

LOGIS GRIPS® SILENCE LIGHT PLUS Mini dock

 

LOGIS GRIPS® SILENCE LIGHT PLUS mini dock made of aluminum

 

  • Anti-slip and anti-drumming mini dock with rough granular surface for noise reduction measures on drive-over ramps as renovation or in the original equipment.
  • Very high sound insulation up to 25 dBA, corresponds to a noise reduction of 85%.
  • LOGIS GRIPS® SILENCE LIGHT PLUS with rough granule surface: combines a high coefficient of friction with a high R-Class, even in the wet. DEKRA-tested coefficient of friction in wet conditions > 0.60μD, slip class R12.
  • High elasticity and good adhesion on rough surfaces.
  • Easy and fast workability without curing time; approx. 1 hour.
  • Unlimited working temperature.
  • Dekra-tested quality according to VDI 2700, sheet 14. Slip resistance tested according to DIN 51130.

Logis GRIPS® SILENCE LIGHT PLUS Mounting-Kit

Everything for self assembly

 

  • Contains everything you need for self-assembly of LOGIS GRIPS® SILENCE LIGHT PLUS.
  • Consists of fixing materials for plates and aluminum wedges, a countersink, drills and thread-rolling screws for mounting a silencer on the desired loading ramp or optionally self-adhesive.

LOGIS GRIPS® SILENCE LIGHT PLUS Aluminum Wedge

Crash protection for the mini dock

 

  • The aluminum wedge is mounted on the edges of the silencer plate and creates a barrier-free transition for loading personnel, forklifts, pallet trucks, etc. to the ramp floor.
  • The silencer plates are protected from damage by the wedge.
  • Solid aluminum profile available depending on size

Advantages

Load at any time without noise with the silencer for your mini docks. This is exactly what the revolutionary LOGIS GRIPS® SILENCE LIGHT PLUS technology is all about. Once assembled, the noise is reduced by approx. 85%, i.e. 25 dB. This means earlier loading times in the morning and longer evenings for your business, without annoying residents by excessive noise pollution. In addition, the anti-slip function of the surface is increased to R12 and thus meets the highest safety requirements.

For self-installation or by our service partners on site in less than one hour per ramp! LOGIS GRIPS® SILENCE LIGHT PLUS is available for every mini dock ex works as well as a retrofit kit for your existing mini docks.

LOGIS GRIPS® SILENCE LIGHT PLUS are manufactured fully automatically in quality assured processes in Germany. Your advantage is that the comprehensive certificates from TÜV and the German Employer’s Liability Insurance Association regarding noise reduction and slip resistance can be adopted without further testing on site.

  • No more stress with the authorities: Expert opinion for noise reduction by 85 percent (25dB)
  • More flexible business: loading earlier in the morning and longer in the evening without the fear of disturbing residents with noise
  • Carefree working: Your employees no longer have to wear hearing protection against noise
  • Even in heavy rain: no more slipping
  • No interference with the statics of the mini dock
  • Quality has top priority: highly resistant to weather, salt and chemicals
  • Good and fast: quick screwing on site (approx. 1 h)
  • No exceptions: LOGIS GRIPS® SILENCE LIGHT PLUS available for all new docks
  • Easy to re-order: available at any time as a retrofit kit for existing docks

FAQ

How are the plates attached? Can each drive-over ramp be retrofitted?

LOGIS GRIPS® SILENCE LIGHT PLUS are made up on site using standard tools. Thus, every mini dock can be retrofitted. The plates are fixed to the plateau with screws. In order to avoid tripping hazards, access wedges are placed at the edges, which are also fixed with screws.

Is the system certified?

Yes, LOGIS GRIPS® SILENCE LIGHT PLUS is certified All properties have been tested by various testing institutes for different characteristics. Of course we can send you the certificates. Please simply send us a message.

How wear-resistant is a LOGIS GRIPS® SILENCE LIGHT PLUS anti-drumming sheet?

It depends on the frequency of use. When used properly, the LOGIS GRIPS® SILENCE LIGHT PLUS sheet is highly wear-resistant. The boards are also resistant to salts, oils, diesel and various chemicals. A resistance list as well as tests for wear and tear can be obtained from us.

How long does the installation take? Can I install the panels myself?

The in-house facility manager can of course install the anti-drumming panels himself. Installation instructions are available in the LOGIS GRIPS® SILENCE LIGHT PLUS installation kit. However, we recommend that you have an installation carried out by one of our regional installation partners. The installation time is usually 1 hour per mini dock, which is then immediately ready for use again.

Questions? Feel free to ask!

 

We are always happy to advise you. Please call us or simply send us an email. We will get in contact with you.

You are a retailer and are interested in adding our products to your catalog? No problem! Please get in contact with us.

+49 (0)8636 695 900
info@logis.ag